SL3100T 游泳池漏水检测染色剂
Appearance: concentrated liquid, no particular odor
Color in aqueous solutions: neon yellow / green fluorescence under UV light
The fluorescent effect depends on the concentration of dye; however,
beyond a certain dose, this fluorescence tends to disappear.
Excitation wavelength: around 365 nm (fluorescent lamp)
Emission wavelength: around 520-525 nm
pH (at 20°C): about 8-11, in aqueous solution
Alkali resistance: good resistance
Melting point: 320°C
Shelf life: at least 5 years, in hermetically sealed
packaging, protected from light, moisture, freezing, and heat.
分享：
What is SL3100T Leak Detection Dye for Swimming Pool？
SL3100T is a biodegradable fluorescent water tracer with an innovative extra concentrated formulation! Ideal for pool leak detection and water infiltration testing; SL3100T is Biodegradable, Environmentally Friendly, Fluorescent under UV Lamp, Cleaning Easy, Ready To Use.
Parameter of SL3100T Leak Detection Dye for Swimming Pool
| Content | Data |
|---|---|
| Suitable wavelength for fluorescence inspection. | 365NM |
| Typical usage ratio(L) | A single dose of 60 ml to tint over 3000 liters of wate |
| Solubility(Petroleum products) | Insoluble |
| Solubility (Water) | Fully dissolved |
| Density（20 °C） | 1.05—1.15 |
| Flash Point | >100°C (212°F) |
| Ionic | Anionic |
| Stickiness | ≤60 |
| Seal Material Compatibility | All rubber, plastic and metal parts (including concentrated and diluted dye) |
为何选择/产品特点
• A single dose of 60 ml to tint over 3000 liters of water
• Ideal concentration and format for searching for pool leakage
• optimal and progressive dosage thanks to its graduation to the ML and its needle
• A reformable cap for several uses
• Clean and precise manipulation
• Light and easy to transport
• SUNLONGE in 365 Nm UV light from SUNLONGE
• Bright colors, easily identified
• Very good solubility, easy dispersion
• Easy cleaning with Brillant Remover.
• Biodegradable, non -polluting, non -toxic (respect the conditions of use and asscribed dosage)
规格
Appearance: concentrated liquid, no particular odor
Color in aqueous solutions: neon yellow / green fluorescence under UV light
The fluorescent effect depends on the concentration of dye; however,
beyond a certain dose, this fluorescence tends to disappear.
Excitation wavelength: around 365 nm (fluorescent lamp)
Emission wavelength: around 520-525 nm
pH (at 20°C): about 8-11, in aqueous solution
Alkali resistance: good resistance
Melting point: 320°C
Shelf life: at least 5 years, in hermetically sealed packaging, protected from light, moisture, freezing, and heat.
How to Use
1. Shut off the water supply to stop any movement and facilitate detection.
2. Ensure that the water level is above the suspected leak.
3. Ensure that the product is used more than 12 hours after water treatment products (chlorine, etc.) have been added.
4. Ensure that the pH of the water is greater than or equal to 7.
5. Assemble the kit: fit the extension tube onto the syringe tip.
6. Using the kit, draw the required amount of product directly from the bottle.
7. Carefully dip the extension tube into the water at the suspected leak and inject the product with small pulses.
8. If there is a leak, the fluorescent yellow dye will be sucked in to locate the leak.
9. Wait for the dye to disappear before swimming again. In water, the dye disappears in less than an hour in daylight and sunlight. This time is longer if the product is used in a closed, unlit room.
10. Clean the kit with water after use.
应用
- Swimming pool leak detection
- Tracing waterways
- Leak detection in pipes
- River flow measurements
- Tracing ocean currents
